Chevy Corvette Forum banner
1 - 7 of 7 Posts

· Registered
Joined
·
129 Posts
Discussion Starter · #1 ·
repainting my black valve covers with the aluminum fins. they are sandblasted and i polished the fins. my question is, do i paint the covers and remove the paint off the fins with paint remover or sand off. or do i tape the fins?
 

· Registered
Joined
·
5,591 Posts
I've seen some actually use Vaseline instead of tape
either way , masking is easier that removing
 

· Registered
Joined
·
5,591 Posts
that's good if you are doing one coat
 

· Registered
Joined
·
5,591 Posts
I guess you could but wouldn't any residual thinner affect the new paint ?
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top