Chevy Corvette Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I have a 79 c3 and recently replaced the power steering pump, control valve and slave cylinder because of a leave in the c/v.. have adjusted the c/v as per corvette central video and the system works fine when front wheels are off the ground but when the wheels are on the ground the car is almost impossible to steer. Any suggestions as to where go next to correct this. Both pump and c/v have been replaced twice...
Thks
 
1 - 1 of 1 Posts
Top