Chevy Corvette Forum banner

1 - 14 of 14 Posts

·
Registered
Joined
·
307 Posts
me i run a setup for a 50 shot will be goig to 150 shot when the rest of the safty stuff shows up
im runing a zex kit zex bottle heater with eddel brock window switch set to come on at 3000 rpm and shut down at 5500 rpm and nitrous exress jets but i havnt hit it yet but its all installed just wainting for more saty stuff dont want to blow the motor
 

·
Registered
Joined
·
307 Posts

·
Registered
Joined
·
836 Posts
Discussion Starter #8

·
Premium Member
Joined
·
9,048 Posts

·
Registered
Joined
·
124 Posts
But when done properly, it makes a ton of power, and even more torque.
Plus, the torque and hp curves are almost dead flat. Peak power from the hit of the button.
I have been using it for 17 years.
:thumbsup3:I agree. I ran a 150hp shot on a stretched V-Max. I only hit it when past 2000rpm's, and let off the button @ 9000rpm's. I'll put a 100hp shot on my L98. I'll set it up to start at 2000rpm's, and off @ 4500rpm's. It should be fun!
 

·
Registered
Joined
·
836 Posts
Discussion Starter #13
Nitrous!

I have Bin runnin it for 4 Years/ in a stk C-4 88 & I don't want to push it too far Cause it's got cast pistons & they GO Boom....
 
1 - 14 of 14 Posts
Top