Chevy Corvette Forum banner

Need a chip redone for my 87

2199 Views 10 Replies 6 Participants Last post by  vettex2
I put a 434 stroker in my vet. where would the closest place be to get the car a dino and have a chip burned. I live in Geneseo, IL. the closest i could find was twin cities, MN. thanks for any help.
1 - 11 of 11 Posts
I put a 434 stroker in my vet. where would the closest place be to get the car a dino and have a chip burned. I live in Geneseo, IL. the closest i could find was twin cities, MN. thanks for any help.

What are you using for an intake manifold and injectors? The stock Tuned Port is only good for about 4000 rpm with a 350" engine so you'll certainly need something that will flow a LOT more.
the closest i could find was twin cities, MN.
Problem is not the dyno but finding someone who knows how to tune the ancient computers used in our cars.Not many were tuned back in the day so the knowledge is a bit specialized
Most shops only know how to tune LSX engine
The closest place is a 7 hr drive, TPI Specialtys (www.tpis.com) Was trying to find something closer, like Chicago or something closer ?
The closest place is a 7 hr drive, TPI Specialtys ?
You still haven't answered what intake you are using ?????

but a shop like TPiS that is experienced in these engines should be able to send you a base tune to start the the engine and then work with you on the tune
without you needing to go on a dyno until final " fine tune" time
This could be interesting.
You find beating a dead horse interesting?

:DeadHorse:
You find beating a dead horse interesting?

:DeadHorse:
:slapface: I find dino interesting. Over your head.
That and actually reading the whole post....

was thinking a stock tpi motor for some reason...
Just asked a simple question, if anyone new of a place closer. Good luck with your rides this summer and enjoy.
a pretty much specialized tuner is needed.....I know of nothing close to you
but

http://www.tpichips.com/contact.htm

is Hypetech still in business ?
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top