Chevy Corvette Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
22 Posts
Discussion Starter · #1 ·
having difficulty getting the speedo to work, replaced the gear on the trans with another 8 tooth gear and a new 20 tooth ( blue ) driven gear and cannot seem to get them to mesh right ...any Ideas ?
 

· Registered
Joined
·
22 Posts
Discussion Starter · #2 ·
gears

I found out there are 2 driven diameter gears on the output shaft, a 1.6.. and a 1.8... I didn't know this and bought and replaced my original gear with the wrong OD gear, ..I how have the right gear on the shaft and all is well !
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top