Chevy Corvette Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
10,181 Posts
Discussion Starter · #1 ·
I had mentioned all C3 engines are offset 1-1/2" to the right for steering box and upper control arm clearance but there's more to the story. Because of the 1-1/2" engine offset the drive shaft is also offset by about 1-1/2" The tunnel is about 6" wide but yet the drive shaft is within 3/4" of the passenger side of the tunnel because of the engine being offset.
 

Attachments

1 - 1 of 1 Posts
Top