Chevy Corvette Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
116 Posts
Discussion Starter · #1 ·
I want to modify a stock 71 vett shifter handle to bolt on to a hurst linkage.has anyone done this? Before I cut the bottom off the stock shifter and drill two holes I was woundering if someone has done this before. I want to get it wright the first time. Thanks k.k.
 

·
Registered
Joined
·
610 Posts
Some vendors sell a stock looking, nearly identical handle just for this scenario that bolts right up to the Hurst linkage. I would check into that first before you modify your existing stock handle. Of course it won't have a functional reverse T-handle but you lose that anyway once you have the Hurst linkage.


Big T
 
1 - 2 of 2 Posts
Top