Chevy Corvette Forum banner

HSR hood clearance

1949 Views 3 Replies 3 Participants Last post by  vetteoz
has anyone tried to stuff a Stealth ram under a toledo pro 2 3/4 hi rise hood ? and does it fit? If nnot what hood does fit it?
1 - 4 of 4 Posts
I did look in the past threads and found the in depth one by slvrvette but it looks like he has a aftermarket hood on there with the dual scoops.
If you can, measure the clearance of a stock hood with a stock intake. Referencing off of something the same on both engines (i.e. valve covers) measure the height of both intakes. Comparing the numbers and factoring your 2-3/4 should get you in the ball park. My intake is not stock, and though I don't think the heights are different from stock to mine, I don't want to throw you off kilter.
has anyone tried to stuff a Stealth ram under a toledo pro 2 3/4 hi rise hood ? and does it fit??
Depends how far forward the rise in the Toledo hood starts .
The HSR has a clearance problem on the stock hood near the TB .
HSR is 10" above the block , C4 has only 9.25" from block to hood
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top