Chevy Corvette Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
hi guys, new here and need to remove my smog pump as its not needed or connected as headers have been installed.( no need for emission stuff here in New Zealand) what i need to know is how to run the new, shorter drive belt now there is no pump.1990 c4 l98. thanks, any helpful info will be appreciated.
 

· Registered
Joined
·
2,849 Posts
need to remove my smog pump as its not needed what i need to know is how to run the new, shorter drive belt now there is no pump..
You have a PM
You don't need A/c in NZ ,just take the targa off :thumbsup3:.

Ditch the A/c compressor as well and you won't need the air pump eliminator ,
just make a adjustable brace for the Alt like on old Holdens and Falcons to adjust the belt tension
Gives lots of room to work on the front of the engine


 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top