Chevy Corvette Forum banner
1 - 1 of 1 Posts

· Smokin Vendor
876 Posts
Discussion Starter · #1 · (Edited)
If you are considering tuning your C5 or C6 Corvette or taking it somewhere to get tuning done, then you need to own the Calibrated Success GM Tuning Guide DVD’s. Calibrated Success has created and unparalleled training system that can be experienced from the comfort of your own home, when it’s convenient for you.

If you’re brand new to tuning, you’ll want to start with the GM Tuning Beginners Guide DVD. This guide will cover topics such as:

  • Proper data logging and hardware setup
  • Click by click instructions using the latest software from HPTuners and EFILive
  • Proper instruction for both MAF and VE based tuning
  • Complete fuel injector characterization data for many popular applications
  • Time saving tips to make the most of your dyno tuning
The material in this DVD will help avoid greater then 90% of the typical problems encountered by tuners by building on a solid foundation of knowledge and good practices. If you decided that proper calibration may be more than what you expected and you need to look for help, the information provided in this DVD will give you knowledge of what you need to be asking a potential tuner so that you get what you are expecting. If you would like to further your learning, buyers of the DVD are also eligible for a discount toward the live Advanced GM Calibration class from Calibrated Success.

Calibrated Success’s GM Tuning Advanced Guide DVD picks up where the Beginners DVD ends.
GM Tuning Advanced will cover the following:

  • Tuning large camshafts
  • Scaling for high power and fuel and air flow
  • Tuning with “virtual VE” Coefficient Tuning
  • Live Demos Using the latest in EFILive software
This DVD will tie up all your tuning questions that were not covered in the Beginners guide. Includes in-depth explanations in using the “virtual VE” tables derived from the six polynomial coefficient tables. Learn how to properly scale your calibration and when it is needed. At last, you will have the materials in your hands to take in-depth instruction in the privacy of your home and the ability to go over it as many times as you need to understand it. This DVD does not cover the subjects in the Beginners Guide DVD, it is meant to be used with the Beginners DVD having already been studied.

About the Author: Greg Banish is a mechanical engineer and motorsports enthusiast who works as an OEM calibrator by day and professional engine tuner in his spare time. After studying for a bachelor’s degree in Mechanical Engineering at GMI Engineering & Management Institute (Kettering University), he wrote his thesis on vehicle instrumentation and measurement. Putting this education to practical use, he founded his own performance shop outside of Detroit and has served local enthusiasts, shops, automotive companies and OEMs. Greg spent three years working for General Motors as the hybrid powertrain calibration engineer responsible for the Chevrolet Volt fuel economy and emissions. He is a member of the Society of Automotive Engineers and SEMA.

Purchase online at Zip*Corvette Parts

Read more Corvette Parts news...
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.