Chevy Corvette Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
102 Posts
Discussion Starter · #1 ·
Knowns: Fuel pump and strainer 1 1/2 years old, fuel filter less than a month old, fuel pressure regulator is the 2nd one installed in the last 30 days.
With KOEO fuel pressure is 37psi (measured with two different FP gauges) and it take from 10 to 12 minutes to bleed down from 37 psi to 30psi.
Have no idea if this is within specs or not? With engine running (which is not often) fuel pressure is 37psi. Due to car dying at will, have not tried getting it out on the road. Car does not run
rough and or miss when it can be started? Sure would like to get the car up and running.. Any thoughts or suggestions..
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top