Chevy Corvette Forum banner
1 - 1 of 1 Posts

· Registered
40 Posts
Discussion Starter · #1 ·
Corvette Racing 650hp #3 C6R ALMS GT1 Tribute Car - SEMA Show Build from 2LZ Z06

Here it is. This SEMA Show project car was the idea of a Corvette Racing enthusiast that sprouted into a 3 month project which garnished national acclaim, magazine covers, and even made its way to greet the Corvette Racing team drivers. Make no mistake, this is no backyard build. This was project was built in a professional family run auto facility in business since 1946. There is far too much to say about the quality, attention to detail, and craftsmanship that was needed to put this together.

Included with this car are official Team Corvette crew gear, a Corvette Magazine featuring this car on the cover autographed by car #3 drivers Ron Fellows, Johnny O'Connell, and Jan Magnussen, and an official Corvette Racing firesuit!! See below for full list!!

Over $117,000 invested in the car when it was built.

Full build sheet available.

The project idea was to build a streetable tribute to the last GT1 Corvette C6.R that dominated the 2008 ALMS GT class piloted by arguably the best Corvette Racing drivers in history Johnny O'Connell, Ron Fellows, and Jan Magnussen.

Project idea was to build a car that was scarily similar to the C6.R, yet retain the interior and drivability of a street car. Before the project was even started, it was meticulously worked out on paper to see if it was even possible to get close to the race car. If every little detail couldn't be duplicated, if the car wouldn't look eerily like the actual car, the project was going to be scrapped. This is a no-nonsense tribute to the 2008 #3 Corvette C6.R. The build took approx 3 months and was completed literally the same night it was packed up in the trailer for the SEMA Show in Las Vegas, NV.

Corvette Racing team manager Doug Fehan was contacted and gave the official blessing to use authentic graphics from the Corvette Racing team. These graphics were acquired from the team and are on the car. Each and every logo on this car is guaranteed authentic with documentation from the Corvette Team as well as the manufacturer of the graphics. They are meticulously placed in the exact positions, per strict rules there are no more and no less stickers on the car than what we were given, and lastly all are in mint condition. We applied them professionally meaning all of the graphics have absolutely no bubbles, and are all perfectly spaced to spec. I also have a couple replacements should you ever need any.

Far too many things to list. The car started as a loaded C6 Z06 (2LZ) with full power, navigation, etc. Highlights of the build include extensively modified exterior with custom C6.R rocker panels molded into the body, carbon fiber “waterfall style” heat extractor hood, carbon fiber front air diffuser, extended rear air diffuser, replica air jack nozzles in the front fenders, and an authentic GT class spec 72" carbon fiber wing.

Suspension lowered 1 inch. 650 hp Vortech V3si supercharged and tuned engine with carbon fiber accent covers. Functional front and rear tow hooks mounted into the frame. Interior received a roll cage, suede accents, suede wrapped steering wheel, and embroidered Corvette Racing "Jake" logos on the headrests and floormats. Very loud and clean custom exhaust, emissions legal (however no mufflers). Full build sheet and dyno sheet available.

Car was the cover/feature article in April 2009 issue of Corvette Magazine and was also featured at

American LeMans Series events in Long Beach, CA. In 2008 at the Long Beach ALMS event, it was actually mistaken for the real GT1 C6.R by track officials and it was escorted onto the track and into the staging/paddock area before we actually told them we were just a tribute car looking for directions to the display area!!

(Also included with the car are authentic Corvette Racing team apparel available only to team members)

-Two different Authentic Corvette Racing team pit crew shirts (2007 & 2008)

-An Authentic Corvette Racing team crew hat

-Authentic 2008 Corvette C6.R firesuit shell was reproduced by Stand21 (made with permission of the Corvette Racing team for display with the vehicle). The suit is made by the original manufacturer Stand21 and features all the embroidered logos and markings of the 2008 Corvette driver nomex suits. It is just the shell (no Nomex) and was made for display on a mannequin with the car.

-A copy of Corvette Magazine (April 2009) featuring this car, that was SIGNED BY ALL THREE DRIVERS of the #4 2008 Corvette C6.R (Ron Fellows, Johnny O'Connell, Jan Magnussen) with documented proof and photos of their signatures.

-A CD containing thousands of high resolution photos documenting the build of the car from start to finish, photos from magazine photo shoots, etc

-All manuals, 2 keys/fobs, Corvette Racing bag, GM Racing/XM Racing keychains

2006 Corvette Z06 (2LZ)

CCW C14 Race Wheels 18x10 19x13
1/2 Inch Aluminum Spacer
Rear Wheel Studs (1/2" longer)
Black Powdercoat
Drop Kit (Front dropped 1 Inch)

Floormats Embroidered with "Jake" Logo
BSR Driver Safety Net
PFADT Roll Bar
Powdercoat (Silver)
Delrin C6R Style Shift Knob
Carbon Edition Suede Steering Wheel

Seat Covers (Upper)
Seat Covers (Lower)
Custom Black Suede Center Console & Seats
Custom "Jake" Embroidery

MTI Front Air Splitter (Carbon Fiber)
Front Splitter Dzus Quick Release Fasteners (10)
C6R Hood
Factory Hood Emissions Label
C6R Spoiler
Rear Lower Valance
RaceMesh Grille (Powdercoated Black)
RaceMesh Grille (Rear)(Powdercoated Black)
Genuine Corvette Accessories License Plate Frame (Black)
Custom Window Tinting
Yellow Fog Light Tinting
ClearBra on Mirrors and Fender Flares
Antenna (UHF)
Black Headlight (Left)
Black Headlight (Right)
Yellow Headlight Tinting

C6R Ground Effects
Ground Effects molded into body
Prep, Primer, Paint (Corvette Racing Velocity Yellow), & Clear

C6R #3 Graphics (Complete)
C6R #3 "Jake Scrape" Stripes
TURN10 Sebring Logo
Position Graphics
Corvette Racing Valve Cover Logos

Vortech V3-Si 6lb Aftercooled Supercharger (Polished)
Cradle Spacers & Bolts
Katech Injector O-rings
NGK TR6 Spark Plugs
Dual Gauge Pod
Boost Gauge
Fuel Pressure Gauge
Labor & Install
Engine Covers (Carbon Fiber)
Fuse Box & radiator Overflow Covers (Carbon Fiber)

Callaway Tips (Two Pairs @ $175 each)
Custom Exhaust

Custom Made Tow Hook (Front)
Custom Made Tow Hook (Rear)
C6R Spoiler Aluminum Brackets
C6R Spoiler Adjustment Rods
Antenna (BMW)
Naca Ducts (Carbon Fiber)
Naca Duct Covers

CAGS Skip Shift



Asking 70k or feel free to make an offer
[email protected]

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.