Chevy Corvette Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,292 Posts
Fusible links should not be soldered back together. Fusible links should be replaced like in kind. They are there to protect the electrical system from overload. If the wire you suspect is bad you can check it by performing a continuity test on that section of wire/fusible link, this is with the battery disconnected. And welcome to the club!!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top