Chevy Corvette Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
1 Posts
If I remember correctly (it's been a few years) there is too much play between the latch and the striker. You can remove the door and glue a piece of plastic to the striker to give it more surface area. This will allow the latch to grab onto it better. You'll understand once you pull out the ashtray door.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top