Chevy Corvette Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
461 Posts
That was used for the shoulder belts but on lap belt only cars there weren't any slots. If you wanted to install through the seat shoulder belts you would replace the trim panel with a left and right that has the shoulder belt provisions along with the bezel on the rear side.
 

· Super Moderator
Joined
·
5,586 Posts
Discussion Starter · #3 ·
That was used for the shoulder belts but on lap belt only cars there weren't any slots. If you wanted to install through the seat shoulder belts you would replace the trim panel with a left and right that has the shoulder belt provisions along with the bezel on the rear side.
Thanks for the info. I will have to look at a coupe and see it
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top