Chevy Corvette Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
36 Posts
Discussion Starter · #1 ·
Ok some of you experts help me out here.
1981. Can't get the vacuum doors to operate. I have inspected all vacuum lines and are good and I have applied manual vacuum to all lines and doors work. I replaced complete switch assy. I have vacuum to switch. What's my problem her guys?
The old switch did the same thing.
 

· Registered
Joined
·
10,519 Posts
Ok some of you experts help me out here.
1981. Can't get the vacuum doors to operate. I have inspected all vacuum lines and are good and I have applied manual vacuum to all lines and doors work. I replaced complete switch assy. I have vacuum to switch. What's my problem her guys?
The old switch did the same thing.

My rubber plug was bad so I cut the color coded hoses off one-by-one and plugged them onto the switch nipples. Then to make sure I knew which nipples the hoses plug onto I drew a diagram of their positions.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top