c6 supercharger

gharris4000 · 10-17-2012, 04:57 AM

i am looking at a supercharger made by dragon engineering. it is a 3.3liter low profile kit that is top mount and will fit under my stock hood. does anyone know more about it. is it a good kit? what kind of supercharger would yall recommend. my car is putting out 472 at the rear wheels. you can see my car on youtube. tell me what you think.
http://youtu.be/rGHBCCIrf5g.

Ragtop 99 · 10-17-2012, 04:21 PM

Is dragon actually in production again? I remember their system had real promise several years ago and they or their system ran into problems.

What are your goals? Those are nice rims, but what tires do you have? A positive displacement blower makes a lot of torque, but most 20 profile tires aren't going to hook it up.

A&A and ECS both make a nice centri kit that will take you well above 600 RWHP. A centri kit can normally work with a lumpy cam, but most PD blower cars seem to use milder ones.

gharris4000 · 10-18-2012, 04:12 AM

i have a set of 315 nitto555 for the rear when i need to put it to the ground.

c6vette · 10-18-2012, 12:16 PM

Damn! Looking good and sounding good too! She hit'n something nice! What cam you running?

I went with the A&A Vortech... couldn't be happier.. lots of torque and top end power! 600+ whp on the stock block. Like most mods, it's just a matter of preference.

I agree with Ragtop, you'll definitely need some new rubber to hook. I'm running Kuhmo ECSTA XS's on the rear. Awesome summer performance tire and they perform well in wet weather too.

gharris4000 · 10-19-2012, 06:44 AM

the cam is a lunati voodoo cam.

c6vette · 10-20-2012, 09:21 AM

Sure sounds good.. I'm guessing you can run it with a blower??? I'm planning to run a mild cam with a .408 upgraded this spring/summer.

FussyMonkey · 05-14-2013, 02:06 AM

sounds freakin awesome

10-17-2012, 04:57 AM	#1
gharris4000 Smokin Member Join Date: Aug 2011 Location: gharris4000@yahoo.com Posts: 27 My Gallery	c6 supercharger i am looking at a supercharger made by dragon engineering. it is a 3.3liter low profile kit that is top mount and will fit under my stock hood. does anyone know more about it. is it a good kit? what kind of supercharger would yall recommend. my car is putting out 472 at the rear wheels. you can see my car on youtube. tell me what you think. http://youtu.be/rGHBCCIrf5g.

10-17-2012, 04:21 PM	#2
Ragtop 99 Smokin 1000HP Twin Turbo Club Join Date: Oct 2009 Location: Bethesda MD Posts: 1,552 My Gallery	Is dragon actually in production again? I remember their system had real promise several years ago and they or their system ran into problems. What are your goals? Those are nice rims, but what tires do you have? A positive displacement blower makes a lot of torque, but most 20 profile tires aren't going to hook it up. A&A and ECS both make a nice centri kit that will take you well above 600 RWHP. A centri kit can normally work with a lumpy cam, but most PD blower cars seem to use milder ones. __________________ 2008 Atomic Orange Coupe 3LT, CC3, Z51 M6 LG Pros with cats, Vararam, 160 T-stat, DTE 3.90s, Elite tunnel plate, catch can, LG Wheels with 275 / 325 Invos, MGW Shifter, EPS 226/230 115 cam, HPT. Pfadt JOC suspension, Peak ported TB & IM. Gone but not forgotten: 2002 Camaro SS Droptop. cam, gears, etc. 11 sec 99 Z28 Vert, RIP.

10-18-2012, 04:12 AM	#3
gharris4000 Smokin Member Join Date: Aug 2011 Location: gharris4000@yahoo.com Posts: 27 My Gallery	tires i have a set of 315 nitto555 for the rear when i need to put it to the ground.

10-18-2012, 12:16 PM	#4
c6vette Smokin 1000HP Twin Turbo Club Join Date: Sep 2008 Posts: 1,088 My Gallery	Damn! Looking good and sounding good too! She hit'n something nice! What cam you running? I went with the A&A Vortech... couldn't be happier.. lots of torque and top end power! 600+ whp on the stock block. Like most mods, it's just a matter of preference. I agree with Ragtop, you'll definitely need some new rubber to hook. I'm running Kuhmo ECSTA XS's on the rear. Awesome summer performance tire and they perform well in wet weather too. __________________ 2006 Blk C6 vert w/A&A Supercharger kit w/V3 upgrade, Random Tech ceramic-coated LT headers w/hi-flo cats and Corsa Extreme exhaust. New dyno #'s 611rwhp/583tq//Currently under the knife

10-19-2012, 06:44 AM	#5
gharris4000 Smokin Member Join Date: Aug 2011 Location: gharris4000@yahoo.com Posts: 27 My Gallery	voodoo the cam is a lunati voodoo cam.

10-20-2012, 09:21 AM	#6
c6vette Smokin 1000HP Twin Turbo Club Join Date: Sep 2008 Posts: 1,088 My Gallery	Sure sounds good.. I'm guessing you can run it with a blower??? I'm planning to run a mild cam with a .408 upgraded this spring/summer. __________________ 2006 Blk C6 vert w/A&A Supercharger kit w/V3 upgrade, Random Tech ceramic-coated LT headers w/hi-flo cats and Corsa Extreme exhaust. New dyno #'s 611rwhp/583tq//Currently under the knife

05-14-2013, 02:06 AM	#7
FussyMonkey Smokin Member Join Date: Mar 2013 Location: Fayetteville, NC Posts: 12 My Gallery	sounds freakin awesome

Remove Advertisements Sponsored Links
Corvette Forum Advertisement

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode