Electronic Heater & A/C control assembly...Display fades

harleyscrider · 04-30-2008, 06:32 PM

My 2003 50th Annv. Corvette Electronic Heater & A/C control assembly display screen fades in an out and also will not display at times. I figure it may be a lose sodder so I open up the unit and found nothing lose or burnt on the IC board? Is this typical, has anyone else has or seen this problem before...Also can these units be repaired...if so where do you sent then to be fixe or would I be better off to get a new one?

tstar · 04-30-2008, 11:31 PM

You need to resolder the 241s on the power board, you'll see when you look at it.

You can get bulbs here:

http://www.corvetteradios.com/corvetteradios_013.htm

Replace all of em at once...

harleyscrider · 05-09-2008, 06:52 PM

Mr. T, Thks for your reply and web site to corvette radios...I look at my IC board and found the 241's there just to close to the board for me to mess with. But I found a local guy here in SC at took my bad climate assembly (for core) and gave me a refurbush pretty reasonable price too. But thks again for you help...Drive'um safe.

tstar · 05-09-2008, 11:51 PM

OK cool! How much was it and any info on this guy??

04-30-2008, 06:32 PM	#1
harleyscrider Smokin Member Join Date: Apr 2008 Location: South Carolina Posts: 17 My Gallery	Electronic Heater & A/C control assembly...Display fades My 2003 50th Annv. Corvette Electronic Heater & A/C control assembly display screen fades in an out and also will not display at times. I figure it may be a lose sodder so I open up the unit and found nothing lose or burnt on the IC board? Is this typical, has anyone else has or seen this problem before...Also can these units be repaired...if so where do you sent then to be fixe or would I be better off to get a new one?

04-30-2008, 11:31 PM	#2
tstar Smokin 1000HP Twin Turbo Club Join Date: Nov 2006 Posts: 1,918 My Gallery	You need to resolder the 241s on the power board, you'll see when you look at it. You can get bulbs here: http://www.corvetteradios.com/corvetteradios_013.htm Replace all of em at once... __________________ Tim 99 MN6 Coupe STD 344.4/347 SAE 337.5/340.2 Performance = Hurricane CAI w/Volant Airbridge/coupler, LTs, Highflows, X Pipe thru Corsa Indy's, Ripper, Tuned Cosmetics = Vent screens, Front Blackouts, Red bumper letters, Chrome Y2K wheels, Custom Leather DIY Mods = Radiator Screen, Painted Calipers/Hat and Hood Liner, Red Interior Lights, Gill Lights, Frost King

05-09-2008, 06:52 PM	#3
harleyscrider Smokin Member Join Date: Apr 2008 Location: South Carolina Posts: 17 My Gallery	Found local help, Thks again. Mr. T, Thks for your reply and web site to corvette radios...I look at my IC board and found the 241's there just to close to the board for me to mess with. But I found a local guy here in SC at took my bad climate assembly (for core) and gave me a refurbush pretty reasonable price too. But thks again for you help...Drive'um safe.

05-09-2008, 11:51 PM	#4
tstar Smokin 1000HP Twin Turbo Club Join Date: Nov 2006 Posts: 1,918 My Gallery	OK cool! How much was it and any info on this guy?? __________________ Tim 99 MN6 Coupe STD 344.4/347 SAE 337.5/340.2 Performance = Hurricane CAI w/Volant Airbridge/coupler, LTs, Highflows, X Pipe thru Corsa Indy's, Ripper, Tuned Cosmetics = Vent screens, Front Blackouts, Red bumper letters, Chrome Y2K wheels, Custom Leather DIY Mods = Radiator Screen, Painted Calipers/Hat and Hood Liner, Red Interior Lights, Gill Lights, Frost King

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode