Chevy Corvette Forum banner

adjustable side pipes?

5K views 12 replies 9 participants last post by  ROARRR 
#1 ·
hey there, ive currently got flowmaster super 40's on my car but i would like new headers and something louder, trying not to anger the neighbors. do you know of any adjustable side pipes that have some kind of valve inside of the muffler?
 
#3 ·
side pipes

I just picked up these side pipes from Summit along with a set of ceramic coated headers. They also have an install kit that contains all the pipes and clamps to connect the headers to the side pipes here are the parts.

Side pipes...
http://www.summitracing.com/parts/pte-h1060

Install kit...
http://www.summitracing.com/parts/pte-h7402

Headers...
http://www.summitracing.com/parts/big-31106flt/overview/make/chevrolet

I dont know if this is what your after. Whats nice about this set up is you can swap out the muffler part for a piece of 3in straight pipe and let it get loud.
 
#5 ·
I never understood the reason for those on a street car.....
 
#7 ·
are the scars worth it ? :z1-2:
 
#9 ·
I have ceramic Hooker headers and side pipes. Love them! As far as getting the inserts out. Hmmmmm, I'd like to know how. It seems to me, once they are in, they are in.
 
#12 ·
Side pipe inserts

I had to remove the inserts on my side pipes because they seemed to have lost the glass packing around them. Inside the outer pipe, you will notice two tack welds. Grind them off so you can feel the inserts moving inside,Now the real work begins. The only way I could move them was to use a metal puck like piece that fit in the pipe.Then I used an air chisel with a very long bit. That pushed them right out. Installed a new set from "Sweet Thunder"
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top