I am trying to replace my wiper motor b/c I have the turns itself on and off problem.

The little puller is not working for me. It seems to just mar the blades at the bottom, plus I couldn't turn the thing b/c the little metal bar bends to easy.

Please share any experiences that you have that might shed some light. Thanks everyone!

Pull the little circular covers at the base and remove the nut , then flip the wiper arm up at the joint as if you were going to change the blades or something. When you flip it up, it releases a clip at the base and they'll lift right off. That should work!:D

thanks anyways I was able to get directions ofline and I took care of it quite easily!