hulksdaddy
07-21-2008, 07:50 PM
Console Cover Removal/Install
1) Open cover
2) Locate 4 torx screws cover is attached with to the hinge.
3) remove screws
4) Install new cover. Tighten screws until just snug.
5) Close cover. make sure it closes smoothly. You may have to loosen screws and move cover up or back to make sure it's lined up.
6) If it closes nice, tighten screws and you're done.
1) Open cover
2) Locate 4 torx screws cover is attached with to the hinge.
3) remove screws
4) Install new cover. Tighten screws until just snug.
5) Close cover. make sure it closes smoothly. You may have to loosen screws and move cover up or back to make sure it's lined up.
6) If it closes nice, tighten screws and you're done.