hulksdaddy
07-21-2008, 07:04 PM
Coolant Overflow Tank Removal/Install
1) Drain tank with a pump(turkey baster works fine)
2) Remove upper and lower coolant hoses from tank. (I plugged the ends of each hose with some paper towel to stop any leakage)
3) There are only two screws that hold it in, one on each side. Remove those.
4) Lift out tank.
5) Drop in new tank. I attached the lower hose before I dropped it in since it was a little easier to get to that way. Tighten screws.
6) Attach upper hose, fill and let car run. Check for leaks.
Make sure you remove plugs in hoses!:thumbsup:
1) Drain tank with a pump(turkey baster works fine)
2) Remove upper and lower coolant hoses from tank. (I plugged the ends of each hose with some paper towel to stop any leakage)
3) There are only two screws that hold it in, one on each side. Remove those.
4) Lift out tank.
5) Drop in new tank. I attached the lower hose before I dropped it in since it was a little easier to get to that way. Tighten screws.
6) Attach upper hose, fill and let car run. Check for leaks.
Make sure you remove plugs in hoses!:thumbsup: