Here is the official release of the C6 single front mount turbo kit. The kit includes some of the best products on the market today. I use only parts made in the USA on my kits.

The setup that I designed is for the T6 turbos from Forced Inductions. Any of there "S" series turbos will fit on this kit. The setup is a bolt on kit with no cutting of anything in the engine bay or moving of any accessories. The power that they are capable of making is based on your engine setup and drivetrain. You should have no proplem making some single digit passes with a built setup. Here are the standered parts that come with the kit. The only options are the turbos sense everything else is included with the standered kit.


1 3/4 Headers
3/8 Thick header flanges
Weld-on collectors
2 1/2 V-bands on headers/x-over
T6 flange
2 1/2 Crossover
3 1/2 Downpipe
2 1/2 Y-pipe to connect to stock exhaust
2- 3 1/2 Band clamps
2- 2 1/2 Band clamps
1- 3" band clamps
Tial 46mm wastegate
Ceramic coating inside and out
Turbo blanket
Turbo support setup
Heat shields
Fuse box brackets
02 extension
3 1/2" Aluminum radiator with stock snap ring connections
Coolant tank
Radiator hoses
3" silicone 90's
3" to 4" reducer silicone
16" spal fan
Heater hose sleeve
Oil lines feed -4
Oil line return -10
A/C line
3" dual intercoolers
50mm Tial bov
s/s bov flange
3" t-clamps
4" t-clamps
2 1/2 t-clamps
All bolts and nuts included
All brackets included


Here are some pictures of the setup.....
http://i10.photobucket.com/albums/a128/huggerttlt1/corvette/camara032.jpg
http://i10.photobucket.com/albums/a128/huggerttlt1/corvette/camara128.jpg
http://i10.photobucket.com/albums/a128/huggerttlt1/corvette/camara098.jpg
http://i10.photobucket.com/albums/a128/huggerttlt1/corvette/camara095.jpg
http://i10.photobucket.com/albums/a128/huggerttlt1/corvette/camara118.jpg
http://i10.photobucket.com/albums/a128/huggerttlt1/corvette/camara099.jpg
http://i10.photobucket.com/albums/a128/huggerttlt1/corvette/camara100.jpg
http://i10.photobucket.com/albums/a128/huggerttlt1/corvette/camara131.jpg
http://i10.photobucket.com/albums/a128/huggerttlt1/corvette/camara055.jpg
http://i10.photobucket.com/albums/a128/huggerttlt1/corvette/camara115.jpg
http://i10.photobucket.com/albums/a128/huggerttlt1/Picture1111088.jpg
http://i10.photobucket.com/albums/a128/huggerttlt1/Picture1111084.jpg

The whole front of the C6 unbolts with 4 bolts and the a/c and radiator setup boolts on and lift right back up in to the car.

The turbo support system is configured by 2 gas spring shocks with 50 pound force each. They are attached to the turbo flange then to the car front. The shocks move with engine movement with no proplem.

The will come with S76mm turbo and you can add on any "s" series turbo to the kit. It will fit up to the S91. I will have the website updated by weeks end. The price of the kit are as follows

T6 C6 Single Turbo Kit $8999.95 retail

Intro Special Price for first 5 $7999.95

With this being a single turbo you think the power out put would be equal to a procharger kit? Do you guys have a kit for C5's?