Hi, I recently installed a set of Sport Seats out of a 97 into a 2000 FRC. I noticed that I now have 4 new DTC's, the codes are: from the LDCM B2262 & B2264 and the RDCM B2263 & B2265 all of which refer to the horizontal and Vertical Positions of the outside mirrors. These DTC's showed up at the same time I installed the seats so I figured I have tripped some parameters in the BCM regarding the Memory location features, I also noticed as I was rebuilding the seats that the drivers side motors were wired for the basic Memory position. I can't clear the DTC's, they show up as History which is the only way these show up according to the shop manual and can't be cleared until the issue itself is resolved. I think that this is the results of the Seats SCM being different than the Basic power seat that comes in the FRC. Is there something to be reprogrammed to let the BCM or LDCM/RDCM that the Memory feature is available? Any help and insight would be greatly appreciated. Thanks