hey guys im selling the rear end out of my 69 vette. converting over to a straight axle for drag racing. this would be the perfect setup for someone with a high horsepower streetcar or roadrace car. all of these parts are still in the car and will be removed within 3 days if someone is going to purchase. this car has been clocked at 162mph with this setup in it and had no vibrations the car went 11.30 at 123mph in the 1/4 mile. these parts are all high quality

the centersection is a stock corvette housing with an auburn pro series posi-unit debured and polished, 4.11 gears shop-peened and polished, standard 17 spline stub axles, new outer seals and new carrier bearings, with a heavy duty cover with polished sides. i would like to get $850 for the center section but i am open to offers

half shafts are standard 2 1/2 inch diameter, the ends have been totally polished and debured and the whole shaft was shop-peened. have solid lakewood 1350 joints in them. the lakewood joints alone are 60 each in these. i would like to get $225 for the pair but am open to offers.

trailing arms are pretty much standard stuff, both wheel bearings have been replaced with new seals on both sides. i am selling without the rotors or calipers because i need them for my new rear unless someones willing to give me a good price for them still on. i would like to get $650 each or $1200 for the pair. add $100 if you would like with calipers and rotors.

have a stock driveshaft for a stick car will also work with a turbo 350 deburred and shop-peened with lakewood joints installed on both ends. would like to get $100 but am open to offers.

also have the solid lower camber bars with the polyurethane ends. ill take 50 or they will go to anyone that purchases the rear along with the leaf spring that is in the car

all of these parts are painted black the paint isnt show quality but it is a nice driver quality. i could get pictures for anyone that wants them but im honest in the description and if these parts are for a driver car you wont be disapointed. if someone wants to buy the whole setup complete i will take $2000 complete.

i also have some stock corvette gauges from a 69 center cluster, and tachometer. ill would like to get 200 for the center gauges and 75 for the tach. any questions you can email me or give me a call 1-718-594-3003 Shawn

Trailing arms gone. 700 for the center section and 200 for the axles. Need this stuff gone.