broke and poor looking for a buy. Thanks

A word of caution. I had to do the clutch in my 91. If your flywheel is also worn, it cannot be machined, so you may need the dual mass fly wheel and the clutch.
It wasn't a cheap fix, I spent $4500.00 (the parts alone were $1900 for the flywheel and $600 for the clutch) plus a wack of labour. You can go with a Fidanza hi perf aluminium flywwheel, sold through Ecklers and Mid America, at less cost but my mechanic cautioned that anything after market, that results in any additional vibration, could destroy every other bearing in the system. Good Luck.