|
Steve Clifford 04-09-2008, 07:49 AM I was curious is there anything special that needs to be done when installing a new valve cover gasket? Should I use like a RTV silicone on it to make a better seal? Thanks in advance. Performinnorman 04-09-2008, 08:02 AM The gaskets are newer tech than the old style and do not require any adhesive. They are also reusable. DynamicTuningSolutions 04-09-2008, 11:48 PM Just make sure they are clean and dry. Steve Clifford 04-10-2008, 05:03 AM Clean and dry, and reusable, got it. Thanks guys. BTW with the valve cover off is there anything I should be keeping my eye out inspection wise? You know anything in the motor? :cheers: DynamicTuningSolutions 04-11-2008, 12:10 AM Couldn't hurt to give the valve springs a once over to make sure there are no issues. Look for any unknown debris as well. :D smokinvette2 04-11-2008, 05:52 AM Just check and make sure that none of the rockers are loose also, and as DTS has stated look for debris! Greg theforce 04-11-2008, 06:04 AM It is so nice not to have to use RTV, just get the new gasket and away you go! | |