I still cannot find any information as to why my wipers will only work on high. They do work so I know that the motor is good. They started acting up after spraying (very carefully) off the excess antifreeze. Any fix ideas?:z1-2:

I think either Corvette don or the Junkman put something up on this not too long ago.:beerbang:

relay?

relay?
Can you point me to the relay? Don't seem to have it listed on the fuse box by the battery.

From what I could find its either the wiper control module (located under the air grill)or the wiper switch its self .what year is your car?

1999 targa

Any fix ideas?:z1-2:let it dry out ?

let it dry out ?
It has been a couple of months. It should be dry. Looks like I may have to replace the switch on the column.

It has been a couple of months. It should be dry. Looks like I may have to replace the switch on the column.

That would be my first SWAG but I would do anything without some good trouble-shooting first. Have you checked to see if you have any codes first? That's step one. I can post you some trouble-shooting instructions from the manual as well as the schematics but you should really go at this methodically instead of just blindly replacing stuff.

Start with the codes. That's always step one.