looking for help / directions on how to add transmission fluid to my 1999 corvette. I'm going to do a complete fluid, filter and gasket change and dont know how to fill or check the level.

if its a 6 speed driver side towards rear theres a fill plug use a tupe pump :thumbsup:

auto, same thing. there s no dipstick

Do you have access to a lift?

if its a 6 speed driver side towards rear theres a fill plug use a tupe pump :thumbsup:

since when does a 6 speed need a filter and gasket ?

since when does a 6 speed need a filter and gasket ?
excuse me Vettex2 I jumped the gun with answer my bad

Now correct me if I'm wrong, but the way you tell when it's full is when the fluid starts to pour out while you are filling in the same fill hole right
?

Now correct me if I'm wrong, but the way you tell when it's full is when the fluid starts to pour out while you are filling in the same fill hole right
?yes fill it till it comes out:thumbsup3:

make sure car is level

make sure car is level

and warm

and warm

I would assume that is so the fluid flows easier?

I would assume that is so the fluid flows easier?

no
hot fluid expands
if you do it cold, you will over fill