Got a 98 coupe i'm having issues with the tire pressure monitor giving me error on the display, I constantly have to reset. Not really major but a pain, chimes every few minutes to remind me. Keeps reading the right front is flat. After checking to verify, the actual pressure is fine. Anyone know how to reset or test a faulty sensor???

You can train your TPM's with a strong magnet around the valve stems.
Here's the basic procedure:
1. Key on engine off
2. clear out anything on the DIC with the reset button
3. Press the options button, press as many times as necessary until you get a blank DIC.
4. Press and hold the reset button until FOB training comes up, press the Options button for TPM training.
5. Press the RESET button to start training.
6. Go clockwise around the car from the left front with your strong magnet.
7. When a TPM has learned, the horn will honk. Move to the next tire.
8. Repeat 6&7 until you get to the LR tire. The horn should honk 2x when the last sensor is learned.
9. Turn off the key.

Done! :D