I just recently had an A&A kit w/V-3 upgrade installed on my 2006 Corvette. Great system with nice #'s! I'm currently getting about 510/440with a really safe tune on a stock block. I'm currently planning for future (6-8 months) upgrades.

First with the V-3 Trim, is it possible to get more power from that unit by installing a smaller pulley? if so, how much more? If possible, something I may consider until the major upgrade.

I do plan to forge the bottom-end and go with a V-7 Trim next. Since I already have a V-3, do I need to buy a whole new head unit or does the upgrade from V-3 to V-7 only require the purchase of a few parts to add to the V-3 unit?

I know that I'll need a fuel system as well... any suggestions?

I'll also be going with a blower cam. I'm shooting for 700whp, is this attainable without aftermarket heads?

thanks

I just recently had an A&A kit w/V-3 upgrade installed on my 2006 Corvette. Great system with nice #'s! I'm currently getting about 510/440with a really safe tune on a stock block. I'm currently planning for future (6-8 months) upgrades.

First with the V-3 Trim, is it possible to get more power from that unit by installing a smaller pulley? if so, how much more? If possible, something I may consider until the major upgrade.

I do plan to forge the bottom-end and go with a V-7 Trim next. Since I already have a V-3, do I need to buy a whole new head unit or does the upgrade from V-3 to V-7 only require the purchase of a few parts to add to the V-3 unit?

I know that I'll need a fuel system as well... any suggestions?

I'll also be going with a blower cam. I'm shooting for 700whp, is this attainable without aftermarket heads?

thanks

Get it from andy, I am pushing 857 rwhp with his YSI unit and his 1100.00 fuel system and a boost a pump. With no problems at all. Plus these # is on a Mustang dyno. Get you a set of good V/spring and better pushrods. You will not find any place that will help you any better than the guys at A/A....:thumbsup:

Get it from andy, I am pushing 857 rwhp with his YSI unit and his 1100.00 fuel system and a boost a pump. With no problems at all. Plus these # is on a Mustang dyno. Get you a set of good V/spring and better pushrods. You will not find any place that will help you any better than the guys at A/A....:thumbsup:

Thanks for the info, I think I'll be happy with 800whp. I've also been checking with the guys at Vorctechsupercharging. They seem to be pretty good as well.

Get it from andy, I am pushing 857 rwhp with his YSI unit and his 1100.00 fuel system and a boost a pump. With no problems at all. Plus these # is on a Mustang dyno. Get you a set of good V/spring and better pushrods. You will not find any place that will help you any better than the guys at A/A....:thumbsup:

Did you go with aftermarket heads or cam?