Just wanted to give you guys and gals some teaser pics of some upcoming projects to be finished in the next 2 weeks.

1st.project.

06 Denali GMC Truck.
This vehicle came to us after the customer had recently got his vehicle tuned at another local performance shop(non-sponsor) and basicly detinated the motor bad enough to break a piston.

Current Mods upon arrival: Stock 6ltre LS motor,62mm turbo 4l80e transmission.

HPS Mods: HPS Forged 6ltre. Shortblock,HPS Custom Turbo Camshaft,
Turbonetics TC 76 mm Turbo.Custom HPS Tune with HPTuners. Should have some dyno results this weekend.

http://i216.photobucket.com/albums/cc11/Hunter02ss/596.jpg
http://i216.photobucket.com/albums/cc11/Hunter02ss/597.jpg
http://i216.photobucket.com/albums/cc11/Hunter02ss/598.jpg
http://i216.photobucket.com/albums/cc11/Hunter02ss/601.jpg


2nd. Project:

This is our 05 C6 Corvette Project.

We recieved the motor yesterday as well. LSX 427 With ETP 265cc Heads,HPS Custom Solid Roller Blower Cam(.67*-.67* lift-.25*-.26*Duration-116lsa) FLT Stage 7 4l65-70e Transmission, Circle D Billet Converter, Procharger F2with cog pulley, ATI Cog crank pulley,Cartek Flip Drive kit,
American Racing Headers 2in primary headers with 3in. x pipe. This project should be completed by the end of the first week of august.

http://i216.photobucket.com/albums/cc11/Hunter02ss/602.jpg
http://i216.photobucket.com/albums/cc11/Hunter02ss/603.jpg
http://i216.photobucket.com/albums/cc11/Hunter02ss/604.jpg

!!!!!! What do you all suspect that Vette may do?

!!!!!! What do you all suspect that Vette may do?

The limiting factor is going to be the transmission.
We are going to limit the power to around
950rwhp. The same motor in our T/A with our 94mmturbo @22psi. made 1450hp. We are not going to push this setup. This is more to show you guys and gals what we are capable of producing.:thumbsup:

That truck is going to be sick!

That is going to be sick!:givemebeer.sml:

Thanks guys. The truck is finished and is definatly a sleeper. Finishing up the street tuning on Monday and then going to the dyno to get the customer some #'s. The customer has never really had anything with alot of power, so I am going to gradually let him get used to some decent rwhp and then up it as he gets used to it. :thumbsup3:

I would love to have a truck that had that kind of power!

Would love to see that truck too!

I decided to wait a week and have the customer put some miles on the new motor to break it in some before we get some #'s. This saturday we will be at the dyno with it.

The limiting factor is going to be the transmission.
We are going to limit the power to around
950rwhp. The same motor in our T/A with our 94mmturbo @22psi. made 1450hp. We are not going to push this setup. This is more to show you guys and gals what we are capable of producing.:thumbsup:

Dam good # man.:thumbsup:

I want to see the Vette get done!:burnout:

The truck is done and getting some #'s tomorrow evening. The corvette is running as well, and ordering the intercooler kit tomorrow as well. Should be done by the weekend.

I would get in trouble with that!

Status on the truck?

The truck has been tuned and dyno'd.

The mods are :

HPS Forged 6.0 Shortblock
Stock 6.0 Truck Heads
Custom Truck Manifold Kit
TC Single 76mm Turbonetics Turbo
HPS Mild Turbo Cam(570lift-230dur,114lsa)
FLT 4L80E
Circle D Billet Steel Converter
3:73 Rear Gears

12-13psi 520rwhp-515rwtq.
I will get the graph and pics of the truck posted up this weekend.

The truck has been tuned and dyno'd.

The mods are :

HPS Forged 6.0 Shortblock
Stock 6.0 Truck Heads
Custom Truck Manifold Kit
TC Single 76mm Turbonetics Turbo
HPS Mild Turbo Cam(570lift-230dur,114lsa)
FLT 4L80E
Circle D Billet Steel Converter
3:73 Rear Gears

12-13psi 520rwhp-515rwtq.
I will get the graph and pics of the truck posted up this weekend.

Has the owner taken the beast out? If so what did he think?

Wow! :rockon6rk::rockon6rk::rockon6rk: