Here is the question. Does anyone have this cam on their motor and are you happy with it?

The bigger question is that I have been reading that With a cam that uses a lot of Lift like the GT11 cam that you have to change your springs every 15- 25 K miles. I am guessing the cam wears the springs out. Are there springs made that will last alot longer than 25k or so? Any information would be helpful.

Andrew

Bump!!!

Try this link for an up-to-date cam which is easy on the springs

http://www.ls1tech.com/forums/dynamometer-results-comparisons/1132839-403-rwhp-ls1-stock-exhaust-manifolds-mild-cam.html

Here is the question. Does anyone have this cam on their motor and are you happy with it?

The bigger question is that I have been reading that With a cam that uses a lot of Lift like the GT11 cam that you have to change your springs every 15- 25 K miles. I am guessing the cam wears the springs out. Are there springs made that will last alot longer than 25k or so? Any information would be helpful.

Andrew

Do you have the specs of the cam you can post?

Does LPE make all their own cams or are they getting their stuff from Comp?