1st post on smokinvette:

I have recently traded in my 2005 C6 for a 2006 Z06 and would like to lower the car. I don't want to go to far and through off the cars handling. Is there a rule of thumb to follow? Any measurements available?

Dale

<1" generally without changes. However having the car cornerweighted (not necessary unless you have adjustable end links on the sway bar) and a performance alignment will result in a car with less bad manners in tight turns or going over bumps in turns. Not to mention slower tire wear. Yes you can have your cake and eat it too! :D

I think that the ride hieght is just fine where it is. Although if you are into racing then maybe you would want to lower your Z a bit! To each their own!:cheers:

Mine seems low enough on stock..but you can lower it <1" on stock bolts. Any lower and you're going to have some issue, I would imagine.

hey man if u live some place that doesent have high driveways and alot of speed bumps then slammed is the only way to go! just close up that little gap in the fenders and it will look sick...


good luck!