|
: How to replace fron impact bar cek1963 03-30-2010, 02:59 PM Hi folks: i would greatly appreciate procedures on how to replace the front impact bar. This is the square tube frame at the front that protrudes slightly from the underside of the front bumper. many thanks.:cheers: doyoufeellucky 03-31-2010, 01:30 PM I'm sorry, but is this on a C5?:bump2: C5inSB 03-31-2010, 03:49 PM Hi folks: i would greatly appreciate procedures on how to replace the front impact bar. This is the square tube frame at the front that protrudes slightly from the underside of the front bumper. many thanks.:cheers: I have not done this but I have looked it over pretty closely because mine was modified by the previous owner via the "custom by collision" method.... It's really not all that bad. It holds the radiator as well, but it bolts up under the frame. For the most part I believe it can be R&R'd without taking too many things apart. Be careful when you buy a replacement. They sell the piece, but then you need some nut inserts as well. trainwreck 04-02-2010, 06:01 AM I have not done this but I have looked it over pretty closely because mine was modified by the previous owner via the "custom by collision" method.... It's really not all that bad. It holds the radiator as well, but it bolts up under the frame. For the most part I believe it can be R&R'd without taking too many things apart. Be careful when you buy a replacement. They sell the piece, but then you need some nut inserts as well. Custom collision?? C5inSB 04-02-2010, 08:24 AM Custom collision?? It's always been a saying in my neck of the woods. If something has sustained damage we refer to it as "custom by collision"...:patriot: | |