I just gave a oil change and the oil light is still on? How do I reset this thing? Thanks

:cheers:

check your owners manual, or your helms...just reset mine, if you cant find the instructions, let me know and will send them to you!

will be changing the oil in my 91 real soon..........could you share that info?

1 Turn ignition "on", but do not start engine.
2 Press "eng/met" button and release, then within 5 sec. press it again.
3 Within 5 sec. of step 2, press and hold the "range" button. While the button is held, the "change oil" indicator will flash.
4 Continue holding the "range" button until the "change oil" indicator stops flashing and goes out. This should take about ten sec.
If not, turn OFF ign. and repeat from 1.

1 Turn ignition "on", but do not start engine.
2 Press "eng/met" button and release, then within 5 sec. press it again.
3 Within 5 sec. of step 2, press and hold the "range" button. While the button is held, the "change oil" indicator will flash.
4 Continue holding the "range" button until the "change oil" indicator stops flashing and goes out. This should take about ten sec.
If not, turn OFF ign. and repeat from 1.
Worked great.....Thanks. I guess I should get an owners manual.

yeah, there´s a lot of good info in them.

does this work the same way on a 93 ?