|
MR.G. 01-26-2010, 04:28 AM Anyonw know if the LS-7 exaust will fit an LS-2 at the collector without modification. I know it will bolt up to the block, but will it match the collector? If not what kind of modification is necessary? Thanks in advance.:burnout: smokinsilvervette 01-26-2010, 06:21 PM No, it doesn't fit at the collecter. You need the manifolds, down pipe to include the cats and then either the factory H pipe or an aftermarket cat back. There is a Tri Y header, Dougs Headers, available that replaces the manifolds and cats and bolts directly to the cat back . powerlabs 01-26-2010, 07:21 PM No, it doesn't fit at the collecter. You need the manifolds, down pipe to include the cats and then either the factory H pipe or an aftermarket cat back. There is a Tri Y header, Dougs Headers, available that replaces the manifolds and cats and bolts directly to the cat back . Ops, you are correct! I skimmed and thought he was replacing his system to a complete Z06 system, which is an inexpensive and common mod. bullitt4110 01-26-2010, 09:38 PM Like said above you need the manifolds, cat pipes, and H-pipe aswell as get your catback modified to matte upto the H-pipe which is 3" and standard C6 is 2.5" and the Z06 H-pipe does not meet the catback in the same spot as the stock one. Any exhaust should be able to handle the modification with ease, or just get the Z06 mufflers. LJD51 01-27-2010, 05:00 PM Ops, you are correct! I skimmed and thought he was replacing his system to a complete Z06 system, which is an inexpensive and common mod. Love my manifolds to tips Z06 exhaust system...add the Mild2Wild controller and it is the best of both worlds. powerlabs 01-27-2010, 07:23 PM Love my manifolds to tips Z06 exhaust system...add the Mild2Wild controller and it is the best of both worlds. :iagree: The C6 Z06 mufflers are awesome. I set mine up to open on boost (supercharged car). I have them with a set of long tube headers: nhL6Y2lejV0 :sm_party: | |