With these fenders what is the widest tire you can put on the rear of a C5?

Also would I need to get extended wheel wells to cover the gap? Or what do people do here?

How long should something like this take to install?

Thanks

Doug

I have 345's , 13" rims on the rears. Install is pretty easy, painting is the biggest job.

Can't remember if we needed any interior spacers for the qtr panels. I suspect those may come with the kit, L5 should be able to answer that.

http://farm2.static.flickr.com/1233/538670873_6cb65dedbb_b.jpg

Contact forum vendor WestCoastMuscleCars(Claude). He sells them and should be able to help you with any questions you might have. :cheers:

Every time I see that car... Nice ride again.

Tom what hood is that again?

Tim

Every time I see that car... Nice ride again.

Tom what hood is that again?

Tim
????? I think what this person is trying to say Tom, is you have a very nice car and it is always nice to see it!! I very much agree!:cheers:

Every time I see that car... Nice ride again.

Tom what hood is that again?

Tim

Thanks guys!

Hood is the "air extractor hood" by acp:
http://www.acproducts.us/corvetteracebod.htm

rear qtr panels can be ordered directly from Lewis5
http://www.lewisfivemotorsports.com/index.html

????? I think what this person is trying to say Tom, is you have a very nice car and it is always nice to see it!! I very much agree!:cheers:

Yeah you are correct, it was early morning and before I had my coffee. Good looking out!

Either way, its a bitchen Vette! :cheers:

Yeah you are correct, it was early morning and before I had my coffee. Good looking out!

Either way, its a bitchen Vette! :cheers:

Thanks much!

With these fenders what is the widest tire you can put on the rear of a C5?

Also would I need to get extended wheel wells to cover the gap? Or what do people do here?

How long should something like this take to install?

Thanks

Doug

Doug,

You can fit a 345 tire with no problem. The flared quarters come with an extension for the inner wheel well that rivets on to the existing wheel well. The install is pretty easy, but you will need your body guy to spend a few hours to make sure they line up nice and neat before you paint and do the final install. We actually have these on special at the moment. Here is a link:

http://www.westcoastvette.net/id171.html (http://www.westcoastvette.net/id171.html)

Feel free to call or email with questions . Thank you.:cheers:

Doug,

You can fit a 345 tire with no problem. The flared quarters come with an extension for the inner wheel well that rivets on to the existing wheel well. The install is pretty easy, but you will need your body guy to spend a few hours to make sure they line up nice and neat before you paint and do the final install. We actually have these on special at the moment. Here is a link:

http://www.westcoastvette.net/id171.html (http://www.westcoastvette.net/id171.html)

Feel free to call or email with questions . Thank you.:cheers:

Nice price!! PS. The car pictured on your link(lower lleft) is "yours truly". Honored to be featured on your website!

I have 345's , 13" rims on the rears. Install is pretty easy, painting is the biggest job.

Can't remember if we needed any interior spacers for the qtr panels. I suspect those may come with the kit, L5 should be able to answer that.

http://farm2.static.flickr.com/1233/538670873_6cb65dedbb_b.jpg


Tom you have any photos of that hood from the back side?

Nice price!! PS. The car pictured on your link(lower lleft) is "yours truly". Honored to be featured on your website!

:thumbsup: Thanks Tom. Your car definately looks nice with your choice of Mods.:cheers:

Tom you have any photos of that hood from the back side?

Sorry nothing good. When the weather improves here, I need to give that a try.