Whats the best stuff to clean the exhaust tips?

How about to polish them?

I usually hand polish them and after throw on a coat of wax. This has always worked for me.

Pick up a can of "Brasso" metal polish, cleans, shines and adds some protection.:cheers:

Been very happy with Mothers Metal cleaner using their ball attached
to a drill works very well on inside of pipes

Been very happy with Mothers Metal cleaner using their ball attached
to a drill works very well on inside of pipes

:iagree: That ball attached to a high speed 3/8" drill will clean your exhaust with in minutes!

Been very happy with Mothers Metal cleaner using their ball attached
to a drill works very well on inside of pipes

Thanks for the tips guys, I found that Ball and got some chrome cleaner and hooked it up to my cordless drill. Man what use to take 20 - 30 minutes to clean only takes 5 minutes and a better job has been done! New trick to add to the play book! :cheers:

One other polish you might want to try comes in a small blue can about the size of a tennis ball, the polish is blue also. This is what I use and this stuff works great!

:iagree: That ball attached to a high speed 3/8" drill will clean your exhaust with in minutes!

You know what I have been useing the same set up for a while, but how the hell are you guess cleaning the polishing ball? I end up buying a new one nearly every 2 months or so?

Eagle One's Nevr-Dull Wading Polish :thumbsup:

Are you talking inside too? I've never under stood the point of polishing the inside of an exhaust tip, but nothing I've ever had has had enough exhaust for a tip to make sense anyway, always the first thing gone about 1/2 to a 1/4 way from the rear of it, trucks stops about 18" before the axle, VW Fox had no muffler and my K5 Blazer's exhaust I dont think even made it passed the doors, it was an almost blown 305, basically a boat anchor, but sounded DAMN MEAN with no cat or muffler and a 2.5" into 3" y-pipe.

Hi, what do you use to polish the exhaust tip