Free shipping on C5 Chrome Intake Covers through January 31 while supplies last. To order call Bill or Brenda at 804-763-6288
50101 D - INTAKE COVER $399.89
http://www.creativeenginecovers.com/images/50101_D_600.jpg
This is the most important part in the engine bay. The main focus is the center of the engine. This piece is constructed from 14 ga. steel and "show quality" triple chrome plated for a show winning apperance. Installs in about 10 minutes. Folks, these are the finest chrome accessories you’ll find!"

• INSTALLATION INSTRUCTIONS •
1. Remove center retainer in the cowl by inserting a narrow bladed screw driver or similar instrument in the slot and gently prying the middle button up, then grasp the button with a plier and pull retainer out of hole.
2. Loosen the top bolt in the throttle body far enough for the front bracket of the cover to slide between the bolt head and throttle body.
3. Install runner cover by positioning cover under cowl until the hole in the cover lines up with the hole in the cowl. Insert 1.4 x 20 x 3.4 bolt through cowl hole and screw loosely into threaded hole in cover.
4. Slide slotted front bracket between throttle body and bolt head.
5. Make sure cover is aligned on both sides and tighten bolts.

Do you know if the heat retention gets considerably higher when putting these chrome pieces on your engine? Thank you! By the way it is a very nice looking piece!

There is no difference in the operating temperature of your engine with any of my parts installed. They are all engineered with adequate clearance for enough ventilation to prevent excessive heat build up.

Great product, have seen Corvettes at meets with chrome pieces (not sure if yours) put they look like this and looked great! :cheers:

We still have some Intake Covers left but only 5 days left.