http://www.halltechsystems.com/v/vspfiles/photos/HC.125-3.jpg

Halltech Honeycomb 1/8" Cell Laminar Flow Straightener is a direct 1 minute plug and play high flow straightener designed to replace your stock 1/16" restrictive factory straightener. This unit will eliminate lean codes on the 2002-2004 C5 Z06 in all aftermarket intake applications. Works especially well on Vararam and other bottom breathers where the airflow is turbulent at the MAF.

Features

* Halltech Honeycomb Laminar Flow Straightener
* Fits ALL Delphi 85 MAF sensors
* Improved Performance on all LS1, LS6 and LS2 applications
* Replaces the stock .0625" (1/16") honeycomb straightener for less restriction
* Completely eliminates lean codes common with aftermarket intakes when used on the C5 Z06
* 50% less restriction than stock
* Eliminates surging caused by turbulence at the MAF
* Aluminum honeycomb
* Easy to install in 1 minute


To Buy:
http://www.halltechsystems.com/Halltech_Honeycomb_1_8_Flow_Straightener_p/hc.125.htm"

Sounds good. Would it do anything for a descreened LS1? I descreened my MAF early in the ownership of my used 2001 because I heard Z06s came that way from the factory. Since then I've discovered the Z06's throttle body path with no screen was specially calibrated to operate this way. I imagine thats why people with more turbulent aftermarket intakes experience problems. It's kind of a trade off for the lower restriction. I like you having a product that tries to take care of both items - straightening the airflow but reducing the restriction.