I am look for this trim that goes around the outside of the windshield. This trim is about 2 or 2.5 inch wide.

If any one can tell me whare to get this trim or has one for sail please let me know.

Thanks
Xero

if you mean this surround ,called fairings;
3884
I got mine from here; http://www.greenwoodvette.com/options.htm

Fair warning. In order to install them correctly you must re-bend the arm coming off the windshield wiper motor that has the post for mounting to swings. Look under the grill in the firewall to look at it. It is 1/4 plate steel and required a lot of heat to get it to bend and some serious pressure. I have access to a full metal shop and it was still hard to do it right. After heating it needs to be quenched to maintain the proper hardness as well. It turned out not to be a basic job.
Lining up the fairings to get a proper glue in using the 5 minute setting urethane is not for the faint of heart or inexperienced...it also requires 3 people that have some experience working with such stuff to hold in while setting. I think every-one needs to know what they are getting into by trying to install the fairings.

hmmm, I would have to get used to that.

Thanks todd_vette,
I was looking all over for it. Now I know what it is called and I can shop around. Thanks for the info about installing it, I have a nice shop that I work on car, well hotrods, and steetrods. I love camaros, I have turned alot of them to hotrods and streetrods. This is my first vette. I took over some one elses project. I got it cheep. Looking to put in about 5000 in to it. I hope it turns out to be a nice vette.

Thanks again,
Xero

Thanks todd_vette,
I was looking all over for it. Now I know what it is called and I can shop around. Thanks for the info about installing it, I have a nice shop that I work on car, well hotrods, and steetrods. I love camaros, I have turned alot of them to hotrods and streetrods. This is my first vette. I took over some one elses project. I got it cheep. Looking to put in about 5000 in to it. I hope it turns out to be a nice vette.

Thanks again,
Xero

Sweet car collection you have there! Do you still have those other cars?

Sorry I haven't checked this forum in a while.
No I lost the Red Camaro to my ex wife in the divorce. She sold it for 2000. Who ever got it got a great deal.

Yes I think Greenwood is the place to go for it.:thumbsup:

Sorry I haven't checked this forum in a while.
No I lost the Red Camaro to my ex wife in the divorce. She sold it for 2000. Who ever got it got a great deal.

That's an ex wife for ya. My g/f thinks her Kia is cooler than my Vette, or any Vette for that matter. She told me the Vette would go a hundred times before she'd ever ditch her car. I told her I'd only have to ditch her once, forget the other 99 times. Telling her my ultimate goal was to pass this on to our son seemed to smooth things over. For now.

Thanks todd_vette,
I was looking all over for it. Now I know what it is called and I can shop around. Thanks for the info about installing it, I have a nice shop that I work on car, well hotrods, and steetrods. I love camaros, I have turned alot of them to hotrods and streetrods. This is my first vette. I took over some one elses project. I got it cheep. Looking to put in about 5000 in to it. I hope it turns out to be a nice vette.

Thanks again,
Xero

are those your cars in the pics? Very nice!

that would work nice to cover some of the delamination on my zr-1 windsheild...thanks

I have not seen that before, interesting.