|
: Stock Clutch is on it's last leg Kenny-C6Vette 09-03-2009, 07:25 AM I'm surprised it lasted this long, I was thinking about replace it at the end of 2008 with a Z06 clutch but decided to let this one run it's course first. I don't want to go with a stock clutch and open to suggestions. I have 429 RWHP in my '06 C6 and looking for something that has a good feel to it, yet a upgrade from stock. What is recommended these days? powerlabs 09-03-2009, 08:02 AM I'm running a Monster clutch; its a single disk with a cro-moly lightweight flywheel; the entire assembly weights 19 pounds less so the engine revs up a lot faster which is great for downshifts. It cost me around 800 bucks and drives just like a stock clutch... Flat Out 09-03-2009, 08:22 AM Mcleod & Fadanza are some well known clutches :thumbsup: DynamicTuningSolutions 09-03-2009, 08:45 AM RPS makes a fantastic clutch with a stock feel and lots of grip, no chatter, and is a local vendor. (At least at this coast):thumbsup3: AdamsC6 09-04-2009, 06:41 AM There are handful of clutch people listed on left side on SV. :thumbsup: Billy M 09-04-2009, 09:44 AM Our RST Twin would be perfect for you. Has the pedal pressure of a toyota and hold 800 hp. Use PN-6912-07 for the clutch kit and 460530 for the flywheel. The unit is pictured in my avatar. flyinglow 09-04-2009, 11:44 AM Our RST Twin would be perfect for you. Has the pedal pressure of a toyota and hold 800 hp. Use PN-6912-07 for the clutch kit and 460530 for the flywheel. The unit is pictured in my avatar. Good looking clutch guys! DutchBoy 09-04-2009, 03:43 PM I'll be needing to replace my clutch this winter. Now I have a 2007 C6, can I use a clutch from a Z06? Will I need to mate that with a Z06 flywheel also? This will be more durable clutch than standard C6 clutch right? RawHide 09-04-2009, 04:32 PM I'm running a Monster clutch; its a single disk with a cro-moly lightweight flywheel; the entire assembly weights 19 pounds less so the engine revs up a lot faster which is great for downshifts. It cost me around 800 bucks and drives just like a stock clutch... Monster clutch, is that the brand? Who makes that? :cheers: VetteOnTheRun 09-05-2009, 08:18 AM I'd go with either Exedy or McLeod DutchBoy 09-07-2009, 07:11 AM I'll be needing to replace my clutch this winter. Now I have a 2007 C6, can I use a clutch from a Z06? Will I need to mate that with a Z06 flywheel also? This will be more durable clutch than standard C6 clutch right? ?? Thanks! :patriot: Kenny-C6Vette 09-14-2009, 07:13 AM Thanks for all the help everyone, Fidanza was the winner this time around. Should have it soon! Fidanza 09-23-2009, 12:54 PM Thanks for all the help everyone, Fidanza was the winner this time around. Should have it soon! Thanks Kenny, glad we could help!:thumbsup: | |