Hi all the week is nearly done. Last night I replaced one of my headlights and now when closed it is not flush with the hood?? I can't seem to locate where to adjust or align this? Help please.

There should be 4 bolts/nuts that are going to be holding the headlight assembly in place that can be adjusted so that when closed unit is flush with hood. While doing this you may want to center the headlight, how I've done it in the past is park the car about 15 feet from my garage door (while its closed) and compare the 2 headlights beem then adjust accordingly. Hope this helps!:D

Loosen up those 4 nuts mentioned above, and shift it around as you need to, best to do at night for the alignment.