Recently purchased set of A/market slotted disc rotors(88-95),firstly is the thickness of the rotor each side of the vented section middle normally the same size or is the outer side thicker?
If the outer side is thicker does that mean that the slots on the inside of the rotor are shallower/smaller to compansate for the thinner material to minimise chance of cracking?
There seems to be a lot of variance in rotor slot design ..LxWxD

I have a set of non slotted DBA (quality Australian made :thumbsup: ) ones here and the thickness is the same both sides.

I have a set of non slotted DBA (quality Australian made :thumbsup: ) ones here and the thickness is the same both sides.

Ah that is what I thought ,the ones I just received are lot thicker on outer side,I dont know what the difference will equate too.
the slotting is very shallow and narrow on both sides:eek2: