|
Vette.mix 06-11-2009, 05:51 PM I have a projector, 11 pin harness, bezel and HUD gadge culster - $500.00 I just did an install on my 98 and checked these parts and all worked correctly. I can also get install instructions and be willing to help via phone and pics if needed Snowsnyper 06-13-2009, 03:02 AM VettMix: I have a 2000 convert thats never had HUD. Are you saying the wire loom is there and all I have to do is swap out the dashes, and plug your unit in? Our mileage is about the same so it would be sweet if thats the case. Let me know. :burnout: Jim Vette.mix 06-13-2009, 03:53 AM VettMix: I have a 2000 convert thats never had HUD. Are you saying the wire loom is there and all I have to do is swap out the dashes, and plug your unit in? Our mileage is about the same so it would be sweet if thats the case. Let me know. :burnout: Jim You dont swap the dash, you have to cut a slot in it and the under side is marked. Its really not that difficult, you have to swap the airbag light on the gadge cluster but I could do that before I sent it out. It took me about 4-5 hours. since I've done it once it now it would only take me about 3 hours. Ive have the instructions and would be willing to give you help- too bad your so far away or it would have cost you a six pack for my help. It is the best mod I have done Martin Snowsnyper 06-14-2009, 06:08 PM PM sent Vette.mix 07-14-2009, 12:58 PM ttt :burnout: | |