|
Z06nAZ 02-21-2007, 06:41 PM The display on my heat/AC unit just went out and I seem to have lost my manual in the move... I'm thinking its just a fuse that's gone out but not quite sure...I have an '01 Z06. Has anyone else ran across this? Thanks! Quikonesilver 02-21-2007, 06:50 PM The display on my heat/AC unit just went out and I seem to have lost my manual in the move... I'm thinking its just a fuse that's gone out but not quite sure...I have an '01 Z06. Has anyone else ran across this? Thanks! Are you talking about the switch? if so... and if the function of the switch is still working then it may be the LED/light under the switch rather than fuse. Z06nAZ 02-21-2007, 07:02 PM not the switch-- the actual LED lights that indicate what the temp, etc. is... tstar 02-21-2007, 09:20 PM You have to resolder the resistors feeding the display. They typically have cold solder joints for some reason. I have the full instructions for both board variants, send me your EMail address so I can EMail the instructions to you. If you're not comfortable with soldering or dissasembling your HVAC unit, there is a reputable repair service offered through EBay that will get you fixed for like $50.00 with an extensive warranty I believe.... Z06nAZ 02-27-2007, 06:01 AM thank you Tim! I saw the instructions and that should be all I need... tstar 02-27-2007, 02:55 PM Anytime, if you need anymore info give me a shout! | |