I have some light scratches in the clear coat that have not made it to the paint. Whats the best way to get these removed or fixed?

Get yourself some 3m and a 7424 porter cable, i suggest this 7424 model because its great for begineers and does a good job

Get yourself some 3m and a 7428 porter cable, i suggest this 7428 model because its great for begineers and does a good job

OKAY BLU, I'll be the first dummy to step up to the plate. Can you articulate a little on 3M.:huh:

Use 3M Finesse-it II finishing material to polish automotive paint after color sanding with 1500 grit wet and dry paper. It will also remove light scratches in the clear coat. Use it with a rotary polisher. Can be obtained at automotive paint stores and on line suppliers.

I might try this method, I have some swirls that I would like to see gone!

I have had good luck with three stage waxes, cleaner, polish, then wax. If that don't do it, i would use a 3m compond more agressive than finesse it and then use the finesse it. The Porter cable buffer is a great product, buy some extra pads though....

No, use the Finesse II first and if that does not work then use something more agressive otherwise you run the risk of going thru the clearcoat. I know of what I speak, I used to restore classic cars and have painted and refinished many................

No, use the Finesse II (that's what it says on my bottle) first and if that does not work then use something more agressive otherwise you run the risk of going thru the clearcoat. I know of what I speak, I used to restore classic cars and have painted and refinished many................

Yes, but the real name is 3M Finesse IT II. I use it for very light scratches and it works fine.

Just as an FYI, the original poster, you may want to post this in the detailing secftion, there's a LOT of very knowledgable people there and that's where this should go! *S*

Well it really depends on experience. But i guess with a lack of finesse it would be a safe choice.....

"Yes, but the real name is 3M Finesse IT II."

Right, and if you read my original post recommending it on this thread you will see that I called it correctly. You somehow managed to add to my post.......with "(thats what it says on my bottle)" Where did you come up with that?:hulk:

Yes, but the real name is 3M Finesse IT II. I use it for very light scratches and it works fine.

Just as an FYI, the original poster, you may want to post this in the detailing secftion, there's a LOT of very knowledgable people there and that's where this should go! *S*

I use this stuff to full satisfaction! Cool avatar DC!:thumbsup:

Detail Dude in the Detail section will set you free!!!!

I didn't add to post? Mine does say Finesse it II. I just cut it short to finesse it....

Get yourself some 3m and a 7428 porter cable, i suggest this 7428 model because its great for begineers and does a good job

This does work well.

:thumbsup3:

I did a video of how I wash and wax my car for folks who are looking for some kind of direction. This is by no means a bible to how it should be done as that would be very disrespectful to those who are actually in this business and other who know a hell of a lot more about this than I ever will. It is however what I do for now and I will probably change up my procedure as more experienced minds chime in with what they feel is an improvement in my technique. If you actually watch these from You Tube's website, you can choose to watch the higher quality video which will come in handy when viewing the waxing sections.

One important point that I should make is that I had already prepped the car months ago by claybarring it. What you will see here is basically the ritual that I use to keep the paint in excellent condition.

Proper preparation is the secret to achieving the results that you will see. You cannot achieve these results without doing so first.

http://pc-surgeon.net/images/cforum/washwax2.jpg

Part 1: The Wash & Dry

http://www.youtube.com/watch?v=u6iAITQDSHM


Part 2: Swirl & Scratch Removal

http://www.youtube.com/watch?v=1NVMPf6QhoI


Part 3: Swirl & Scratch Removal Pt. II, and the Start of the Polishing Process

http://www.youtube.com/watch?v=XuNlwryJ54E


Part 4: The Polishing Process Pt. II

http://www.youtube.com/watch?v=SORMjxoaz5E


So, break out your popcorn and kick up your slippers, the Junkman is now appearing on a screen near you! This will cost you about 40 minutes of your life.

:D

The porter cable buffer/polisher i have is a 8624. But it is same, 6 inch. It works like a charm. Have been using for several years with nothing but complete satisfaction.

Get yourself some 3m and a 7428 porter cable, i suggest this 7428 model because its great for begineers and does a good job

I search for the 7428 and could not find one.The only one I found was the 7424.Is that the one you meant?? $125 on amazon.:thumbsup:

I search for the 7428 and could not find one.The only one I found was the 7424.Is that the one you meant?? $125 on amazon.:thumbsup:Yep **** fingers dont go where i tell them sometimes lol its a great unit for begineers 7424 :thumbsup: