My 1984 C4 Corvette has some issues and now won't start and Clutch won't release fully. The car was running perfectly fine 2 days ago and everything sounded good. I have checked the battery with Volt meter and it has juice. Where can I start to look for the problem? Thanks so much!

Mike

If your clutch is not fully releasing that is probably the reason you wont start. Try bleading your clutch to see if it will release.

If your clutch is not fully releasing that is probably the reason you wont start. Try bleading your clutch to see if it will release.
This is because the computer thinks that the clutch is engaged and even when you push the clutch in, it still thinks that it is engaged. But definetely bleed out the clutch and see what happens!

I'm pretty sure the clutch switch is on the pedal, so once its moved and inch the starter will turn. Sounds like you do need to bleed the clutch though. Does the engine turn over same as before or does the starter fail to engage at all?

I'm pretty sure the clutch switch is on the pedal, so once its moved and inch the starter will turn. Sounds like you do need to bleed the clutch though. Does the engine turn over same as before or does the starter fail to engage at all?

It may also be a faulty clutch switch on the pedel.