SpeedLingerie.com – World’s Finest Automotive Bra

| C6 Corvette | C5 Corvette | C4 Corvette | C3 Corvette |

C6 Corvette

top

SpeedLingerie Super Bra – NOSE COVER (NCV)

Distinctive front end protection for an unmistakable American classic.

Coming Soon: Speedlingerie Super Bra (2009 C6/ZR1)
NOW AVAILABLE: Corvette C6/Z06-427 Will Cooksey Edition
NOW AVAILABLE: Corvette C6/Z06

 

1. The single piece installation results in no loose flapping pieces to abrade car surfaces, or that allow debris to get underneath.
2. No exposed surfaces for rocks, bugs, road & track debris to get behind.
3. The turn indicators/fog lamps, etc. are protected with a 40 gauge clear convertible top plastic.
4. Brake and/or air induction grills are fully functional; airflow is unrestricted by highest quality marine mesh, patterned to exactly match the existing grillwork.

Regarding front license plates (check your local laws).
SpeedLingerie offers a system to display the front license plate called a “Removable License Pocket” or RLP.

We build a separate pocket/RLP. It has a clear front, a zipper at the bottom edge and snaps on the back, near the top edge. Your Nose Cover is built with matching zipper and snaps. You slip your license plate into the RLP. You then zip and snap the RLP to the outside of your Nose Cover.

The Benefits to you are:

1. Flexibility – The RLP can be installed or removed depending on your requirements.
2. Protection – Complete coverage (no license plate openings at all) at all times.
3. Preservation – Maintain a smooth look with no holes, no screws, & no brackets mounted directly to your front bumper.
4. Style – Your Nose Cover will also look continuous, without large openings cut into it.

MIRROR COVER (MIC)

Excellent side mirror protection
Whether it’s direct exposure, front wheel spray or parking lot mishaps, side mirrors can take as many hits as the nose of the car. SpeedLingerie.com, Inc. offers an excellent solution for side mirror protection.

HOOD COVER (HDC)

Add protection. If we can protect the leading edge of the hood, and build it to meet the Speed Rating, then why not? We offer a Hood Cover that slips right over the leading edge of the hood (in all factory exterior colors). It attaches to the hood insulation pins under the hood. This is a great compliment to the Nose Cover for the C6

HEAD REST COVER (HRC)

The goal is to keep your seats in your Corvette looking brand new. Head Rest Covers for your C6 Corvette provide this service AND several added benefits.

First, they are available in ALL factory interior AND exterior colors. You have the flexibility to add color or blend with the factory seats, or both – your choice. Second, they protect the seat tops from sun damage and also protect embroidery (as on the 2008 Indy pace Car). And finally, the head rest area has just a little added padding to improve driving comfort on the longer road trips.

They look very sharp – very factory. They simply slip over your seat tops. Instructions are included. Fits all Corvettes (coupe, convertible, and Z06) 2005 – 2009.

Note: Call us for customs: 2-tone colors, alternate color stitching, and interior colors.

HARD TOP CASE/COVER (HTC)

You can add protection in color for the C6 with a removable Hard Top. When you pull that top out, it would be nice to have a giant padded envelope that you could safely store it inside. SpeedLingerie can do it. We offer a Hard Top Case/Cover in ALL factory exterior and interior colors. Simply slip your hard top into our Hard Top Cover/Case and you can rest easy that the paint finish and edges are safe and protected.

Note: Call us for customs: 2-tone colors, alternate color stitching, and interior colors.

SHIFT BOOT

SHIFT BOOT-AUTOMATIC (SBA)
Add a splash of color and style. The shift boot on the center console is ALWAYS black. Now you have choices. We make Shift Boots in all factory exterior and interior colors. Remove the factory black boot and replace it with the SpeedLingerie Shift Boot – instructions included. It looks great in combination with the matching Center Console Cover and E-Brake Cover.

SHIFT BOOT-MANUAL/6SPEED (SBM)
Add a splash of color and style to your 6-speed too. The shift boot on the center console is ALWAYS black. We also make the Shift Boot for the 6-Speed in all factory exterior and interior colors. Remove the factory black boot and replace it with the SpeedLingerie Shift Boot – instructions included. It looks great in combination with the matching Center Console Cover and E-Brake Cover.

Note: Call us for customs: 2-tone colors, alternate color stitching, and interior colors

E-BRAKE HANDLE BOOT/COVER (EBC)

The E-brake boot on the passenger side of the center console is ALWAYS black. You can change that. We make E-Brake Covers in all factory exterior and interior colors. Remove the factory black boot and replace it with the SpeedLingerie E-Brake Cover – instructions included. It looks great in combination with the Center Console Cover and Shift Boot.

Note: Call us for customs: 2-tone colors, alternate color stitching, and interior colors

REAR DECK COVER  5-in-1 (RDC)

This item offers protection TIMES FIVE. This one component serves FIVE different functions

1) REAR DECK COVER – It attaches to the cargo net pins in the truck area and protects the rear top deck from scratches/nicks/etc. It also protects the rear fascia from nicks caused by belt buckles. When finished, simply flip it into the trunk or over your luggage so it is ready when you reach inside again. If it’s stored/flipped over luggage in the trunk, it also protects the underside of your rear trunk lid from being nicked/scratched by protruding pieces of luggage.

2) CARGO COVER (coupes) – To keep your luggage and gear stowed neatly out of sight and protected from the rays of the sun, you can attach the Cargo Cover to the inside of your rear deck lid. Connect the long cord to the two forward hooks, and the two loops to the two rear hooks. With the body colored side facing upwards, it appears as if the rear deck surface continues beneath the rear glass. A very clean solution with a very factory look.

3) TRUNK MAT – It lays flat on the trunk floor to protect your trunk carpeting from dirty shoes, golf bags, etc, AND can be wiped clean. Mud and dirt can be more easily cleaned from a smooth surface than from carpeting.

4) DOOR COVER – Yes, door cover. When you go to the grocery store, you park far away. Still one car still parks right next to you. In your garage, you worry that your door gets nicked by the door of the second car in your garage. See SpeedLingerie. We cleverly sewed a cord into the Rear Deck Cover to make it a Door Cover. You just slip the cord over the raised driver door window, align the cut-out for the mirror head, and it protects your door. The Door Cover blends with the car because it is in body color. The cord is locked inside the window and cannot be removed without cutting the cord. PLUS we made the rear edge longer than your car door, so if you swing your own door wide you will not chip your door edge on a wall or another car.

5) FENDER COVER – I know, but we can’t stop. You’re at the gas station and you need to check your oil but you don’t want to risk scratching the fender as you reach over it. Who carries a fender blanket with them? You do. The fasteners sewn into the Rear Deck Cover, now Fender Cover, attach to the hood stand-offs (by the wiper and inside the headlight bucket) in the engine bay. This also solves the issue of the standard fender blanket sliding off of the narrow front fender of a Corvette (we tried to design it to cook and clean too, but this was the limit).

Note: Call us for customs: 2-tone colors, alternate color stitching, and interior colors.

CENTER CONSOLE COVER (CCC)

Added cushion and protection PLUS added color and style. That C6 is a blast to drive, but on those long road trips the tip of your right elbow gets sore. You also want to protect that factory lid from getting nicked. We have the solution. We offer Center Console Covers in ALL factory exterior and interior colors. Easy installation – instructions included. Wraps over the existing lid and uses factory fasteners for a very factory look.

Note: Call us for customs: 2-tone colors, alternate color stitching, and interior colors

DOOR HANDLE COVERS (DHC)

Protect the interior door handle grips from wear and dirt AND add a splash of color. We offer Door Handle Covers in ALL factory exterior and interior colors. Easy installation – they simply wrap over the existing handles with hook & loop tape. Easy to clean –simply remove, wipe down, and re-install.

Note: Call us for customs: 2-tone colors, alternate color stitching, and interior colors.

PARADE FLAGS

Each Parade Flag Kit contains: (2) 9″ x 16″ American flags with flexible white flag poles, black nylon mounting caddies with mounting hardware, and a set of installation instructions. Life expectancy is 100miles at 60mph. They were designed and developed with precision by a fellow Corvette owner to proudly display your flags while enhancing the sleek appearance of your Corvette.

Parade Flags are mounted directly to Corvettes with the T-Top removed or the Convertible-Top down. Flags are available for installation in the factory mounts at the top edge of the windshield. Flags are also available for installation in the rear mounts near the forward edge of the rear deck. Flags are not available for fixed-roof coupe models, including Z06 models.

BRACKETS FOR NCV

In the event that the original Installation Parts for your SpeedLingerie Products are lost, missing, damaged and need to be replaced, you can order them here on-line.

In the event that the original Installation Documents for your SpeedLingerie Products are lost, missing, damaged and need to be replaced, you can down-load a copy from the “Installation Docs” section here on-line.

All New SpeedLingerie Products come complete with Installation Parts. (Brackets, Hardware, and Hook Tape)
There is no need to order Replacement Installation Parts when placing a new order.

C5 Corvette

top

SpeedLingerie Super Bra – Nose Cover (NCV)

Distinctive front end protection for an unmistakable American classic.

1. The single piece installation results in no loose flapping pieces to abrade car surfaces, or that  allow debris to get underneath.
2. No exposed surfaces for rocks, bugs, road & track debris to get behind.
3. The turn indicators/fog lamps, etc. are protected with a 40 gauge clear convertible top plastic.
4. Brake and/or air induction grills are fully functional; airflow is unrestricted by highest quality marine mesh, patterned to exactly match the existing grillwork.

MIRROR COVERS (MIC)

Whether it’s direct exposure, front wheel spray or parking lot mishaps, side mirrors can take as many hits as the nose of the car. SpeedLingerie.com, Inc. offers an excellent solution for side mirror protection.

HOOD COVER (HDC)

Add protection. If we can protect the leading edge of the hood, and build it to meet the Speed Rating, then why not? We offer a Hood Cover that slips right over the leading edge of the hood (in all factory exterior colors). It attaches to the hood insulation pins under the hood. This is a great compliment to the Nose Cover for the C5.

HEAD REST COVER (HRC)

Protect the tops of the seats from the damaging rays of the sun. Keep the tops of your seats factory fresh. Add color to the tops of your seats, or match the factory color, or both. Support your head when you get thrown back into the seat BEFORE you accelerate and add a driving comfort for the long road trips.

Again, they look very factory and also have that custom appeal. SpeedLingerie Head Rest Covers simply slip over the top of the existing seat – no modification required. They are available in ALL factory exterior and interior colors. Purchase (2) sets to change your “look” from matching exterior color to matching interior color.

Note: Fits Corvette factory “Sport Seats” only (the seat with an opening under the head rest area)

Note: Call us for customs: 2-tone colors, alternate color stitching, and interior colors.

SHIFT BOOT

SHIFT BOOT-AUTOMATIC (SBA)
Add a splash of color and style. The shift boot on the center console is ALWAYS black. Now you have choices. We make Shift Boots in all factory exterior and interior colors. Remove the factory black boot and replace it with the SpeedLingerie Shift Boot – instructions included. It looks great in combination with the matching Center Console Cover and E-Brake Cover.

Note: Call us for customs: 2-tone colors, alternate color stitching, and interior colors.

SHIFT BOOT-MANUAL/6SPEED (SBM)
Add a splash of color and style to your 6-speed too. The shift boot on the center console is ALWAYS black. We also make the Shift Boot for the 6-Speed in all factory exterior and interior colors. Remove the factory black boot and replace it with the SpeedLingerie Shift Boot – instructions included. It looks great in combination with the matching Center Console Cover and
E-Brake Cover.

Note: Call us for customs: 2-tone colors, alternate color stitching, and interior colors.

DOOR HANDLE COVERS (DHC)

Protect the interior door handle grips from wear and dirt AND add a splash of color. We offer Door Handle Covers in ALL factory exterior and interior colors. Easy installation – they simply wrap over the existing handles with hook & loop tape. Easy to clean – simply remove, wipe down, and re-install.

Note: Call us for customs: 2-tone colors, alternate color stitching, and interior colors.

CENTER CONSOLE COVER (CCC)

This item offers protection TIMES FIVE. This one component serves FIVE different functions

1) Rear Deck Cover – It attaches to the cargo net pins in the truck area and protects the rear top deck from scratches/nicks/etc. It also protects the rear fascia from nicks caused by belt buckles. When finished, simply flip it into the trunk or over your luggage so it is ready when you reach inside again. If it’s stored/flipped over luggage in the trunk, it also protects the underside of your rear trunk lid from being nicked/scratched by protruding pieces of luggage.

2) Trunk Curtain (convertibles) – We sewed-in a strip of loop tape. You can connect the loop to the strip of hook tape that you adhere to the cross-member over the trunk area, creating a Trunk Curtain. It separates the trunk area from the convertible top (in the down position) AND protects the convertible top from luggage stowed in the trunk area. It also wraps all the way under the convertible top (in the down position) to protect the convertible top from luggage stored under the
convertible top.

3) Trunk Mat – It lays flat on the trunk floor to protect your trunk carpeting from dirty shoes, golf bags, etc, AND can be wiped clean. Mud and dirt can be more easily cleaned from a smooth surface than from carpeting.

4) Door Cover – Yes, door cover. When you go to the grocery store, you park far away. Still one car still parks right next to you. In your garage, you worry that your door gets nicked by the door of the second car in your garage. See SpeedLingerie. We cleverly sewed a cord into the Rear Deck Cover to make it a Door Cover. You just slip the cord over the raised driver door window, align the cut-out for the mirror head, and it protects your door. The Door Cover blends with the car because it is in body color. The cord is locked inside the window and cannot be removed without cutting the cord. PLUS we made the rear edge longer than your car door, so if you swing your own door wide you will not chip your door edge on a wall or another car.

5) Fender Cover – I know, but we can’t stop. You’re at the gas station and you need to check your oil but you don’t want to risk scratching the fender as you reach over it. Who carries a fender blanket with them? You do. The fasteners sewn into the Rear Deck Cover, now Fender Cover, attach to the hood stand-offs (by the wiper and inside the headlight bucket) in the engine bay. This also solves the issue of the standard fender blanket sliding off of the narrow front fender of a Corvette (we tried to design it to cook and clean too, but this was the limit).

Note: Call us for customs: 2-tone colors, alternate color stitching, and interior colors.

CENTER CONSOLE COVER (CCC)

Added cushion and protection PLUS added color and style. That C5 is a blast to drive, but on those long road trips the tip of your right elbow gets sore, and over time you leave a small dent or wear spot in your factory center console. Perhaps that factory lid is already nicked. We have a solution. We offer Center Console Covers in ALL factory exterior and interior colors – we even offer two-tone customs (call us). Easy installation – instructions included. Wraps over the existing lid and uses factory fasteners for a very factory look.

Note: Call us for customs: 2-tone colors, alternate color stitching, and interior colors.

TRUNK LID LINER (TLL)

Add a splash of color and protect the inside of your trunk lid from nicks and scratches. We offer Trunk Lid Liners in ALL factory exterior and interior colors. Easy installation – with hook & loop tape. Easy to clean – simply remove, wipe down, and re-install.

Note: Call us for customs: 2-tone colors, alternate color stitching, and interior colors.

*REAR NOISE COVER (RNC)

Less noise and less wind flow from the trunk area, and a more finished look. They also improve security for those openings behind the seats that make it easy to reach into the trunk area, while maintaining access. We offer Rear Noise Covers in all factory exterior and interior colors. Each Cover features a color fascia, semi-rigid frame, sound deadener, and soft rear panel. It attaches to the inside lip of the body lid that closes over the convertible top storage area. We even included a hinged section in each Cover that allows you to reach your hand under it to access a wallet or camera stowed in the trunk area. The hinge also the Panels to remain in place when the convertible top is moved up or down. This product works great and features a very beautiful factory look.

Note: Call us for customs: 2-tone colors, alternate color stitching, and interior colors.

E-BRAKE HANDLE BOOT/COVER (EBC)

The E-brake boot on the passenger side of the center console is ALWAYS black. You can change that. We make E-Brake Covers in all factory exterior and interior colors. Remove the factory black boot and replace it with the SpeedLingerie E-Brake Cover – instructions included. It looks great in combination with the Center Console Cover and Shift Boot.

Note: Call us for customs: 2-tone colors, alternate color stitching, and interior colors.

GRAB BAR HANDLE (GBC)

Highlight your black dashboard by adding a Grab Bar Cover to the passenger side over the airbag. We build Grab Bar Covers in all factory exterior and interior colors. It wraps over the existing bar and attaches using a zipper for a true skin tight ‘lingerie’ fit. This is a really sharp way to set-apart your Corvette.

Note: Call us for customs: 2-tone colors, alternate color stitching, and interior colors.

Parade Flags

Each Parade Flag Kit contains: (2) 9″ x 16″ American flags with flexible white flag poles, black nylon mounting caddies with mounting hardware, and a set of installation instructions. Life expectancy is 100miles at 60mph. They were designed and developed with precision by a fellow Corvette owner to proudly display your flags while enhancing the sleek appearance of your Corvette.

Parade Flags are mounted directly to Corvettes with the T-Top removed or the Convertible-Top down. Flags are available for installation in the factory mounts at the top edge of the windshield. Flags are also available for installation in the rear mounts near the forward edge of the rear deck. Flags are not available for fixed-roof coupe models, including Z06 models.

Brackets for NCV

In the event that the original Installation Parts for your SpeedLingerie Products are lost, missing, damaged and need to be replaced, you can order them here on-line.

In the event that the original Installation Documents for your SpeedLingerie Products are lost, missing, damaged and need to be replaced, you can down-load a copy from the “Installation Docs” section here on-line.

All New SpeedLingerie Products come complete with Installation Parts. (Brackets, Hardware, and Hook Tape)
There is no need to order Replacement Installation Parts when placing a new order

C4 Corvette

top

SpeedLingerie Super Bra – Nose Cover (NCV)

Distinctive front end protection for an unmistakable American classic.

1. The single piece installation results in no loose flapping pieces to abrade car surfaces, or that allow debris to get underneath.
2. No exposed surfaces for rocks, bugs, road & track debris to get behind.
3. The turn indicators/fog lamps, etc. are protected with a 40 gauge clear convertible top plastic.
4. Brake and/or air induction grills are fully functional; airflow is unrestricted by highest quality marine mesh, patterned to exactly match the existing grillwork.
5. The grill is still visible through the mesh, as is for example, the Ferrari Cavallino.

MIRROR COVERS (MIC)

Whether it’s direct exposure, front wheel spray or parking lot mishaps, side mirrors can take as many hits as the nose of the car. SpeedLingerie.com, Inc. offers an excellent solution for side mirror protection.

Parade Flags

Each Parade Flag Kit contains: (2) 9″ x 16″ American flags with flexible white flag poles, black nylon mounting caddies with mounting hardware, and a set of installation instructions. Life expectancy is 100miles at 60mph. They were designed and developed with precision by a fellow Corvette owner to proudly display your flags while enhancing the sleek appearance of your Corvette.

Parade Flags are mounted directly to Corvettes with the T-Top removed or the Convertible-Top down. Flags are available for installation in the factory mounts at the top edge of the windshield. Flags are also available for installation in the rear mounts near the forward edge of the rear deck. Flags are not available for fixed-roof coupe models, including Z06 models.

Brackets for NCV

In the event that the original Installation Parts for your SpeedLingerie Products are lost, missing, damaged and need to be replaced, you can order them here on-line.

In the event that the original Installation Documents for your SpeedLingerie Products are lost, missing, damaged and need to be replaced, you can down-load a copy from the “Installation Docs” section here on-line.

(New SpeedLingerie Products come complete with Installation Parts. There is no need to order Replacement Installation Parts when placing a new order.)

C3 Corvette

top

SpeedLingerie Super Bra – Nose Cover (NCV)

Distinctive front end protection for an unmistakable American classic.

1. The single piece installation results in no loose flapping pieces to abrade car surfaces, or that allow debris to get underneath.
2. No exposed surfaces for rocks, bugs, road & track debris to get behind.
3. The turn indicators/fog lamps, etc. are protected with a 40 gauge clear convertible top plastic.
4. Brake and/or air induction grills are fully functional; airflow is unrestricted by highest quality marine mesh, patterned to exactly match the existing grillwork.
5. The grill is still visible through the mesh, as is for example, the Ferrari Cavallino.

MIRROR COVERS (MIC)

Whether it’s direct exposure, front wheel spray or parking lot mishaps, side mirrors can take as many hits as the nose of the car. SpeedLingerie.com, Inc. offers an excellent solution for side mirror protection.

Parade Flags

Each Parade Flag Kit contains: (2) 9″ x 16″ American flags with flexible white flag poles, black nylon mounting caddies with mounting hardware, and a set of installation instructions. Life expectancy is 100miles at 60mph. They were designed and developed with precision by a fellow Corvette owner to proudly display your flags while enhancing the sleek appearance of your Corvette.

Parade Flags are mounted directly to Corvettes with the T-Top removed or the Convertible-Top down. Flags are available for installation in the factory mounts at the top edge of the windshield. Flags are also available for installation in the rear mounts near the forward edge of the rear deck. Flags are not available for fixed-roof coupe models, including Z06 models